Commercial Epoxy Contractor — Western U.S.
Spec-driven commercial epoxy flooring for GCs, plant engineers, and facility managers. 25 years of industrial coatings work across aerospace, food & beverage, dairy, schools, and wastewater. USDA-compliant systems. ISNetworld and Avetta verified.
Built for facilities, not garages
Commercial epoxy is a multi-layer, professionally installed flooring system rated for industrial loads, chemical exposure, and continuous service. It is not a roll-on garage kit. A commercial system starts with diamond-ground or shot-blasted concrete profiled to CSP-3 or higher, an epoxy or moisture-mitigation primer matched to the slab's vapor transmission, a high-build basecoat (often with a broadcast aggregate for slip and impact resistance), and a chemical-resistant urethane or novolac topcoat.
The system is specified to the actual service conditions — forklift loads, thermal cycling, washdown chemistries, drain configuration, and shutdown window — not selected from a brochure. That spec-first approach is why a properly installed commercial epoxy floor lasts 10–25 years before recoat, while consumer-grade coatings fail in 12–24 months under industrial use.
Peckham Coatings installs commercial epoxy systems from 20 mils up to 1/4-inch urethane cement mortar, including USDA/FDA-compliant systems for food contact zones, ESD-controlled floors for electronics and aerospace, and immersion-grade linings for wastewater containment.
Commercial sectors we work in
Aerospace
Aerospace hangars, MRO bays, and component manufacturing demand floors that resist jet fuel, hydraulic fluid, and heavy rolling loads.
View IndustryDairy Facilities
Dairy plants are the most demanding environments we work in — wet, hot, caustic, and cycling 24/7. Urethane cement is the answer.
View IndustryWineries
Crush pads, barrel rooms, and bottling lines demand chemical-resistant flooring that handles wine, cleaning acids, and constant moisture.
View IndustryBiotech Facilities
Biotech, pharma, and medical device manufacturers depend on cleanroom-rated, ESD-controlled surfaces that pass audit after audit.
View IndustrySchools
K–12 districts and college campuses need systems that install fast over summer break and protect capital assets for decades.
View IndustryRetail Stores
Retail floors take constant pallet jacks, foot traffic, and aggressive cleaning. Our systems install fast and last.
View IndustryPerformance envelope
Have a commercial project in mind?
Send specs or schedule a site walk — we'll match a system to your service conditions and shutdown window.
How a Peckham install runs
1. Spec Walk & Assessment
On-site visit with the GC, plant engineer, or facility manager. We document chemistry, traffic loads, washdown protocol, shutdown window, and any existing failures before recommending a system.
2. Surface Prep
Diamond grinding or shot blasting to CSP-3 or higher. Crack repair, joint detailing, and full containment so production lines stay clean.
3. Moisture Mitigation
Every slab gets a calcium chloride or RH probe test. If MVT exceeds the system's tolerance, we install a vapor mitigation primer rated to 25 lb / 100% RH.
4. System Build
Primer, high-build basecoat, broadcast aggregate (if specified), and chemical-resistant top coat installed to manufacturer thickness with wet-mil checks.
5. QA, Warranty & Care
Holiday testing on chemical-resistant systems, DCOF testing on slip-rated finishes, written warranty, and a maintenance plan with cleaning chemistries and recoat schedule.
Pre-qualified for major facility owners
ISNetworld
Active member in good standing
Avetta
Pre-qualified for major facility owners
USDA / FDA-Compliant Systems
Urethane cement and epoxy systems installed to USDA and FDA specifications for food contact zones.
OSHA-Compliant Safety Marking
Color-coded zoning, anti-slip aggregate broadcast, and forklift-lane striping per OSHA standards.
Real commercial projects
Three recent installs across aerospace, food & beverage manufacturing, and industrial drying — all spec-driven, all active commercial facilities.
Aircraft Hangar Floor Coating
High-performance epoxy floor system installed in an active aircraft maintenance hangar — built for hydraulic fluid, jet fuel, and heavy rolling loads.
View Case StudyFlavor Manufacturing Facility
Industrial epoxy floor system installed across a flavor manufacturing facility — chemical-resistant and built for production-line traffic.
View Case StudyDryer Facility — Washington
Epoxy floor coating system installed at a Washington dryer facility — heat-tolerant and engineered for continuous industrial service.
View Case StudyCommercial epoxy FAQs
Request a commercial epoxy quote
Tell us about the facility, square footage, service conditions, and shutdown window. We'll respond with a spec and schedule.
Every project starts with a plan.
We're always happy to answer any of your questions. Tell us about your facility, your timeline, and your spec.