Methyl Methacrylate (MMA) Flooring Systems
MMA flooring — methyl methacrylate — is one of the resinous flooring systems we install across industrial and commercial facilities in the Western U.S. It is specified when the schedule drives the job: rapid return-to-service, cold-temperature installation, and work sequenced into nights, weekends, and short production shutdowns. Like every system we install, an MMA floor is only as good as the substrate preparation and the system selection behind it, so we test the slab, profile the concrete, and match the build to the traffic and chemistry before the first coat goes down.
Specs, build-up & where this system performs
MMA flooring — methyl methacrylate — is one of the resinous flooring systems we install across industrial and commercial facilities in the Western U.S. It is specified when the schedule drives the job: rapid return-to-service, cold-temperature installation, and work sequenced into nights, weekends, and short production shutdowns. Like every system we install, an MMA floor is only as good as the substrate preparation and the system selection behind it, so we test the slab, profile the concrete, and match the build to the traffic and chemistry before the first coat goes down.
- Fast return-to-service — as little as 4 hours
- Installs at cold and freeze-thaw temperatures
- Night, weekend & shutdown-window scheduling
- Installed over prepared concrete at CSP-3 or higher
- Topcoat chemistry matched to your cleaning regime
- Cold storage, packaging & emergency repair work
How we install your mma flooring system
25 years of best practices, executed the same way on every project. No shortcuts on prep, no cure-time surprises.
1. Surface Prep
Diamond grind, shot blast, or abrasive blast to ICRI/SSPC profile. Crack repair, joint detail, and substrate moisture testing.
2. Primer & Build
Manufacturer-spec primer applied at recorded DFT, followed by build coats matched to your traffic, chemical, and thermal load.
3. Finish & Detail
Topcoat, broadcast aggregate, cove base, and transitions installed to spec — with documented mil thickness throughout.
4. QC & Closeout
Pull-off adhesion testing, photo documentation, manufacturer letters, and warranty paperwork delivered at completion.
Spec a mma flooring system for your facility
Send us your floor plan or scope and we'll come back with a system recommendation and ballpark.
Real installs across the Western U.S.
Where this system fits
Related services
Epoxy & Urethane Flooring
High-build epoxy and urethane systems engineered for heavy load, chemical exposure, and constant traffic.
Urethane Cement Flooring
Thermal-shock-rated urethane cement systems — the gold standard for wet, hot, and sanitary processing environments.
Polished Concrete Flooring
Densified, mechanically polished concrete floors — durable, low-maintenance, and decorative-grade.
Quartz & Flake Epoxy Flooring
Decorative-grade epoxy systems with broadcast quartz or vinyl flake — durable, slip-resistant, and great-looking.
Available across the Western U.S.
Our crews install mma flooring systems across all 5 Western states from our California headquarters in Fresno.
MMA Flooring — Common Questions
Don't see your question listed below?
Qualifying a contractor for industrial work?
Read our hub on what separates industrial coating contractors, the certifications that matter (ISN, Avetta, NACE/SSPC), and how to qualify yours.
Every project starts with a plan.
We're always happy to answer any of your questions. Tell us about your facility, your timeline, and your spec.