Commercial Epoxy Contractor — California
Spec-driven commercial epoxy flooring for California GCs, plant engineers, and facility managers. 25 years of industrial coatings work statewide — USDA-compliant, CARB-compliant low-VOC systems, ISNetworld and Avetta verified.
Coating Systems We Install in California
Flooring, wall, roof, and wastewater systems built for performance, compliance, and durability.
Flooring Systems
- Epoxy, urethane, and concrete flooring for commercial and industrial environments.
- Urethane Cement Flooring for thermal shock, chemicals, and impact.
- Polished Concrete Systems for durable, low-maintenance spaces.
- Quartz & Flake Epoxy Flooring for decorative, slip-resistant durability.
- ESD Flooring for biotech, cleanrooms, and data centers.
Wall Systems
- Epoxy Wall Coatings for clean, washable environments.
- USDA / FDA Wall Systems for food and pharmaceutical facilities.
- Impact & Abrasion Resistant Systems for high-traffic areas.
- Fiber-Reinforced Coatings for added strength and durability.
Roof Systems
- Urethane Roof Coatings for waterproof protection and UV resistance.
- Silicone Roof Coatings for standing water and weather resistance.
- Acrylic Roof Coatings for cost-effective protection.
- Cool Roof Systems to reduce heat gain and cooling costs.
Wastewater Systems
- Corrosion-resistant coating systems for wastewater infrastructure.
- Clarifiers & Vaults built for immersion and chemical exposure.
- Containment Areas designed for durability and long service life.
- Protective Linings for abrasion and chemical resistance.
Commercial epoxy built for California facilities
Peckham Coatings has installed commercial epoxy flooring across California for 25 years — from aerospace hangars in Southern California to dairy and food plants in the Central Valley, wineries in Napa and Santa Barbara, and municipal wastewater facilities statewide. Every system is specified to California's regulatory and operational reality: CARB-compliant low-VOC chemistries, Title 24 considerations on conditioned spaces, OSHA / Cal/OSHA safety striping, and USDA / FDA compliance for food contact zones.
California's climate range — coastal humidity, Central Valley heat, and inland thermal cycling — drives system selection. We spec urethane cement mortar for high-heat washdown environments, novolac topcoats for chemically aggressive plants, and broadcast quartz for slip-rated wet-process floors. Every project starts with a moisture probe, a CSP-3 (or higher) surface prep plan, and a written shutdown-window schedule that respects active production.
Recent commercial projects in California
Real spec-driven installs in active commercial facilities — all completed by Peckham crews.
Aircraft Hangar Floor Coating
High-performance epoxy floor system installed in an active aircraft maintenance hangar — built for hydraulic fluid, jet fuel, and heavy rolling loads.
View Case Study
Flavor Manufacturing Facility
Industrial epoxy floor system installed across a flavor manufacturing facility — chemical-resistant and built for production-line traffic.
View Case Study
Winery Bottling Room Floor Coating
Urethane cement floor system installed throughout a winery bottling room — acid-resistant, slip-rated, and built for harvest after harvest.
View Case StudyCommercial sectors we work in
Spec-driven epoxy systems for California facilities that demand durability, sanitation, and compliance.
Performance envelope
Have a commercial project in California?
Send specs or schedule a site walk — we'll match a system to your service conditions and shutdown window.
How a Peckham install runs
1. Spec Walk & Assessment
On-site visit with the GC, plant engineer, or facility manager. We document chemistry, traffic loads, washdown protocol, shutdown window, and any existing failures before recommending a system.
2. Surface Prep
Diamond grinding or shot blasting to CSP-3 or higher. Crack repair, joint detailing, and full containment so production lines stay clean.
3. Moisture Mitigation
Every slab gets a calcium chloride or RH probe test. If MVT exceeds the system's tolerance, we install a vapor mitigation primer rated to 25 lb / 100% RH.
4. System Build
Primer, high-build basecoat, broadcast aggregate (if specified), and chemical-resistant top coat installed to manufacturer thickness with wet-mil checks.
5. QA, Warranty & Care
Holiday testing on chemical-resistant systems, DCOF testing on slip-rated finishes, written warranty, and a maintenance plan with cleaning chemistries and recoat schedule.
Pre-qualified for major facility owners
ISNetworld
Active member in good standing
Avetta
Pre-qualified for major facility owners
USDA / FDA-Compliant Systems
Urethane cement and epoxy systems installed to USDA and FDA specifications for food contact zones.
OSHA-Compliant Safety Marking
Color-coded zoning, anti-slip aggregate broadcast, and forklift-lane striping per OSHA standards.
California metros & markets
Commercial epoxy in California — FAQ
Commercial epoxy contractor in other Western states
Get a senior estimator on your California commercial epoxy project within 1 business day
Tell us about the facility — square footage, service conditions, shutdown window — and we'll come back with a spec and schedule. Commercial & industrial only.
- Statewide coverage across California, including Los Angeles, San Diego, San Francisco Bay Area.
- No subcontracted installs — same trained Peckham crew on every job.
- ISN & Avetta pre-qualified — COIs available naming your project.