Commercial Epoxy Contractor Washington
Commercial Epoxy Contractor: Washington
Commercial epoxy flooring for Washington GCs, plant engineers, and facility managers. 25 years of industrial coatings work serving Seattle, Tacoma, Spokane, and statewide, aerospace, food-grade, and USDA-compliant systems, ISNetworld and Avetta verified.
Coating Systems We Install in Washington
Floors, walls, roofs and wastewater structures, installed by our own crews.

Flooring Systems
- Epoxy, urethane, and concrete flooring for commercial and industrial environments.
- Urethane Cement Flooring for thermal shock, chemicals, and impact.
- Polished Concrete Systems for durable, low-maintenance spaces.
- Quartz & Flake Epoxy Flooring for decorative, slip-resistant durability.
- ESD Flooring for biotech, cleanrooms, and data centers.

Wall Systems
- Epoxy Wall Coatings for clean, washable environments.
- USDA / FDA Wall Systems for food and pharmaceutical facilities.
- Impact & Abrasion Resistant Systems for high-traffic areas.
- Fiber-Reinforced Coatings for added strength and durability.
Roof Systems
- Urethane Roof Coatings for waterproof protection and UV resistance.
- Silicone Roof Coatings for standing water and weather resistance.
- Acrylic Roof Coatings for cost-effective protection.
- Cool Roof Systems to reduce heat gain and cooling costs.

Wastewater Systems
- Corrosion-resistant coating systems for wastewater infrastructure.
- Clarifiers & Vaults ready for immersion and chemical exposure.
- Containment Areas designed for durability and long service life.
- Protective Linings for abrasion and chemical resistance.
Commercial epoxy chosen for Washington facilities
Peckham Coatings serves Washington commercial facilities across the Puget Sound corridor, Spokane, and the Tri-Cities. Our crews install epoxy systems in aerospace facilities, food and beverage plants, dairy processing, healthcare campuses, schools, and municipal wastewater sites. Every system is engineered around the Pacific Northwest's wet-climate slab conditions, full moisture mitigation, CSP-3 surface prep, and chemistries that tolerate cool ambient install temps.
We specify USDA-compliant urethane cement for food contact zones, ESD-controlled systems for aerospace and electronics, and novolac topcoats for chemically aggressive plants. Every project starts with a moisture probe (Washington slabs frequently exceed 5 lb MVT and need a vapor mitigation primer rated to 25 lb / 100% RH), a written shutdown-window schedule, and ISNetworld / Avetta-compliant safety documentation.

Recent commercial projects in Washington
Real installs in active commercial facilities, all completed by Peckham crews.

Dryer Facility: Washington
Epoxy floor coating system installed at a Washington dryer facility, heat-tolerant and suited to continuous industrial service.
View Case Study
Meat Processing Facility: Urethane Cement
USDA-compliant urethane cement floor system installed throughout a meat processing facility, coved, drained, and ready for daily caustic washdown.
View Case Study
Dairy Epoxy & Urethane Cement Project
Combined epoxy and urethane cement system installed throughout an active dairy, USDA-compliant and made to handle daily caustic washdown.
View Case StudyCommercial sectors we work in
We have put down floors in Washington plants, warehouses, kitchens and clinics. Here are the sectors we know best.
Performance envelope
Have a commercial project in Washington?
Send specs or schedule a site walk. We'll match a system to your service conditions and shutdown window.
How a Peckham install runs
1. Spec Walk & Assessment
On-site visit with the GC, plant engineer, or facility manager. We document chemistry, traffic loads, washdown protocol, shutdown window, and any existing failures before recommending a system.
2. Surface Prep
Diamond grinding or shot blasting to CSP-3 or higher. Crack repair, joint detailing, and full containment so production lines stay clean.
3. Moisture Mitigation
Every slab gets a calcium chloride or RH probe test. If MVT exceeds the system's tolerance, we install a vapor mitigation primer rated to 25 lb / 100% RH.
4. System Build
Primer, high-build basecoat, broadcast aggregate (if specified), and chemical-resistant top coat installed to manufacturer thickness with wet-mil checks.
5. QA, Warranty & Care
Holiday testing on chemical-resistant systems, DCOF testing on slip-rated finishes, written warranty, and a maintenance plan with cleaning chemistries and recoat schedule.
Pre-qualified for major facility owners
ISNetworld
Active member in good standing
Avetta
Pre-qualified for major facility owners
USDA / FDA-Compliant Systems
Urethane cement and epoxy systems installed to USDA and FDA specifications for food contact zones.
OSHA-Compliant Safety Marking
Color-coded zoning, anti-slip aggregate broadcast, and forklift-lane striping per OSHA standards.
Washington metros & markets
Commercial epoxy in Washington: FAQ
Get a senior estimator on your Washington commercial epoxy project within 1 business day
Tell us about the facility, square footage, service conditions, shutdown window, and we'll come back with a spec and schedule. Commercial & industrial only.
- Statewide coverage across Washington, including Seattle, Tacoma, Spokane.
- No subcontracted installs: same trained Peckham crew on every job.
- ISN & Avetta pre-qualified: COIs available naming your project.




